Lietuvių
SERANOVA – Free APP
TPS12 13.7V/1.8A AC/DC UPS Mini Switching Power Supply with battery charging
UPS power supply 12V /1.8A 36W AC/DC for automation & security with backup battery charging control and UPS (Uninterruptible power supply) functionality, allowing the universal input range between 90VAC and 264VAC and incorporating the built-in PFC function. In addition to the primary output, there is a charger output, with a smaller rated current, providing the backup application the security access systems normally need.TPS12 delivers an efficiency up to 86%; it can operate with air convection under -30°C through 70°C. This series is designed with thorough alarm features, including AC OK and battery low signaling; moreover, the relay contacts provided to facilitate use system designs
TPS12 is a 12V /1.8A 36W AC/DC automation & security power supply with backup battery charging control and UPS (Uninterruptible power supply) functionality, allowing the universal input range between 90VAC and 264VAC and incorporating the built-in PFC function. In addition to the primary output, there is a charger output, with a smaller rated current, providing the backup application the security access systems normally need.TPS12 delivers an efficiency up to 86%; it can operate with air convection under -30°C through 70°C. This series is designed with thorough alarm features, including AC OK and battery low signaling; moreover, the relay contacts provided to facilitate use system designs
Feature:
- Universal AC input / Full range
- Protections: Short circuit / Overload / Over voltage
- Battery low protection / Battery reverse polarity protection by fuse
- Prevents Deep Discharge of Battery
- Alarm signal for AC OK and Battery low
- Cooling by free air convection
- 100% full load burn-in test
- Compact size 86.5*59.7*30mm
Applications:
- Security Alarm system
- Access system
- Alarm system
- Automation controllers
| Input Voltage | 90 ~ 264VAC |
| Input Current | 0.5A / 230VAC |
| Output Voltage | 13.7V |
| Output Current | 1.8A |
| Rated Output Power | 36 W |
| Output Type | Single |
| Output Voltage Adjustment | 12 ~ 15V |
| Charge output A | 0.9A |
| Alarm Signals | AC OK, Battery Low |
| Efficiency | 84.00% |
| Operating Temperature Range | -30 ~ +70ºC |
| Approvals | CE,CB,RCM |
| IP Rating / Environmental Protection | less IP68 |
| Dimensions | 86.5*59.7*30mm |
| OUTPUT NUMBER | Main power | Battery charge | |
| DC VOLTAGE | 13.7V | 13.7V | |
| RATED CURRENT | 1.8A | 0.9A | |
| CURRENT RANGE | 0 ~ 2.6A | ||
| RATED POWER | 36W | ||
| RIPPLE & NOISE (max.) Note.2 | 120mVp-p | – | ||
| VOLTAGE ADJ. RANGE | CH1 : 12 ~15V | ||
| VOLTAGE TOLERANCE Note.3 | ±1.0% | ||
| LINE REGULATION | ± 0.5% | ||
| LOAD REGULATION | ± 0.5% | ||
| SETUP, RISE TIME Note.4 | 800ms, 50ms/230VAC 1600ms, 50ms/115VAC at full load | ||
| HOLD UP TIME (Typ.) | 50ms/230VAC 10ms/115VAC at full load | ||
| VOLTAGE RANGE | 90 ~ 264VAC 127 ~ 370VDC | ||
| FREQUENCY RANGE | 47 ~63Hz | ||
| EFFICIENCY (Typ.) | 84% | 86% | |
| AC CURRENT (Typ.) | 0.75A/115VAC 0.5A/230VAC | ||
| INRUSH CURRENT (Typ.) | COLD START 20A/115VAC | 40A/230VAC | |
| LEAKAGE CURRENT | <1mA / 240VAC | ||
| 105 ~ 150% ratedoutput^poweL | |||
| Protection type : Hiccup mode, recovers automatically after fault condition is removed | |||
| PROTECTION | CH1:14.49 ~ 19.5V | ||
| Protection type : Shut down O/P Voltage, repower on to recover | |||
| BATTERY CUT OFF | 10±0.5V | ||
| AC OK | TTL open collector output, ON : AC OK ; OFF : AC Fail ; Ice : max. 30mA@50VDC | ||
| FUNCTION | BATTERY LOW | TTL open collector output, ON : Battery Low ; OFF : Battery OK ; Ice : max. 30mA@ 50VDC | |
| Battery low voltage : < 11V | |||
| WORKING TEMP. | -30 ~ +70°C (Refer to “Derating Curve”) | ||
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | ||
| ENVIRONMENT | STORAGE TEMP., HUMIDITY | -20 ~ +85C, 10 ~ 95% RH | |
| TEMP. COEFFICIENT | ±0.03%/C (0~50°C) on CH1 output | ||
| VIBRATION | 10 ~ 500Hz, 2G 10mln./1 cycle, 60min. each along X, Y^Z^axes | ||
| SAFETY STANDARDS | UL60950-1, TUV EN60950-1 approved | ||
| SAFETY &EMC (Note 4) | WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG100M Ohms / 500VDC / 25C/ 70% RH | ||
| EMC EMISSION | Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 | ||
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A | ||
| MTBF | 658.4 K hrs min. MIL-HDBK-217F (25C) | ||
| OTHERS | DIMENSION | Enclosed type:86.4*59.6*30mm (L*W*H) | |
| PACKING | Enclosed type: 0.145Kg;100pcs/15.5Kg/1.03CUFT | ||
| 1. All parameters NOT specially mentioned are measured at 230VAC Input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. |
|||
| 3. T olerance : includes set up tolerance, line regulation and load regulation. | |||
| NOTE | 4. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. | ||
| 5. Heat sink HS1 ,HS2 can not be shorted.
6. Heat sink HS1 must have safety isolation distance with system case. |
|||
| 7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.) | |||
Standard package contains
- 1 pcs. TPS12
- 1 pcs. Battery Cable
- 1 pcs. AC cable
Related products
Communicators
Controllers